- 14 -
HDTA 614 C ASI
4
t
he
Control
Panel
at
a
glanCe
4.1 m
enu
items
Programme the cassette using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the
key to select the following main menu items:
– Output signal settings:
Modulator on/off, level
Output channel (modulators A and C)
Output frequency (modulators A…D)
QAM modulation
Substitute signal
– ASI input
– Input signal settings:
LNB oscillator frequency, SAT input
Input symbol rate
Input frequency
Station filter
CA module
Economize descrambling capacity
– Options:
Transport stream and ORGNET-ID
BAT, STD-other
Deleting a PID
Renaming a PID
– Data rate
– Network Information Table (NIT)
– Factory reset
4.2 C
ontrol
Panel
The key pad on the head-end station is used to scroll through the menus step-
by-step:
scrolls forward through the menus
select parameters/submenus
set values, initiate actions
selects presets
scrolls backward through the menus
saves all entries
BE-Remote
V44
please wait . . .
