GSS GLC 100, Руководство по сборке

Страница: 8 / 32

- 8 - GLC 100
The EoC modems communicate in peer to peer mode (P2P).
In the factory default settings, each EoC modem can communicate with each
other modem in the network.
The advantage of "Ethernet over Coax" is that it is not necessary to lay new
network cables and that there is no expenditure for additional installation.
The data is transmitted through the low-attenuation return channel, frequency
range of 2…68 MHz. Depending on the quality of the coaxial cable, transmis-
sion distances of up to 700 m can be realized.
The feeding in is done via the terrestrial input of the SAT multiswitch capable
for return-channel signals, via the terrestrial input of the antenna distributor
structure or via an antenna socket capable for return-channel signals (OR 02,
OR 09, OR 11, OR 15, OR 20, ORS 13 DC) in the distribution network.
An access to the Internet or other transmitted IP data are then available on
each return channel capable antenna sockets.
Two networkable devices can be connected to one EoC modem. The IP net-
work can be extended to up to 64 EoC devices.
Ex factory all devices connected to a EoC modem can communicate with each
other. Data is exchanged, network games are transmitted or a centralized
network printer can be accessed. For the monitoring of houses, rooms etc., an
IP camera can be operated via an EoC modem.
At multiple-user antenna networks, encrypted private networks can be config-
ured (see page 20).
If e.g. you would like to provide Internet access in hotel rooms, although a
network connection to the Internet must be possible, but not between the dif-
ferent rooms. To achieve this, a so-called master / slave mode can be set. If
you have any need for this, please contact your sales partner (www.gss.de ->
Sales partners) because the network must be configured specifically for this
purpose.
3 a
ssembly
The device is operated primarily as a stand mounted unit (4 rubber feet).
4 brackets for wall mounting are provided on the bottom. With 2 screws each
different orientations are possible. A drill template can be found on page 30 of
this manual.