GSS GAK 7100, Руководство по сборке, Страница: 7 / 9

- 7 - HOC 168
5 s
etting the output level
• Connect the RF outputs of the modules to the inputs of the RF output collector
D
(fig. 5).
• Connect the antenna test receiver to the test output C of the RF output col-
lector (fig. 5).
• Switch on the head-end station.
• The “Select module / channel strip” – “ SETUP BE160 ” menu appears in the
display. Activate this menu by repeatedly pressing if needed.
Ein/On
SETUP
SETUP
Level
0
OUTPUT
V 10
2 x M
CANCEL
SETUP
S => STORE
MEMORY
S
M
/
0 … -31
M
Bx 1A
C5-12,S3-24 TWIN-SAT
C07
Böx 4
C5-12,S3-24 TWIN-SAT
C07
Bx 1A
DVBT
C 69
BE160
• Press the button.
—> The “Set output level” – “ OUTPUT Level ” menu is activated.
• Using the buttons, set the RF output level as required for the cable
system.
• Press the button.
—> The “Store data” – “ MEMORY ” menu is activated.
• All programmed data is saved by pressing the button. You will be re-
turned to the menu item “Select module / channel strip” – “ SETUP BE160 ”.
• By pressing the button, you will be returned to the menu item “Select
module / channel strip” – “ SETUP BE160 ” without saving the programmed
data.