#160 - 21900 Westminster Highway, Richmond, B.C. V6V 0A8
Tel 604.818.6795 | Toll-free 1.888.824.3442 | Fax 604.278.9604
!
SCRUB AND RECOAT
If the floor finish has been applied:
1. Vacuum or dust mop to remove loose soil and debris.
2. Using a rotary scrubbber or automatic scrubber do a heavy scrub with a scrubbing pad
and a double-strenght of neutral pH detergent sucha s Taski Profi or equal.
3. Pick up solution with a wet vac.
4. Rinse with clean water and allow to throughly dry.
5. Apply 1-2 thin coats of floor finish following initial cleaning.
CAUTION: Phenolic Type Disinfectants are very caustic and may cause adverse e
ff
ects to the
physical properties of the floor covering, including leaving a slippery residue, which may cause
a hazardous condition. If phenolics are used, after each application, thoroughly rinse the
surface with clean water and wet vac the solution. GSP does not recommend the use of
phenolics and will not warranty any damage or harm caused by their use.
STRIP AND RECOAT
1. Vacuum or dust mop to remove loose soil and debris.
2. Using a rotary scrubber or automatic scrubber do a heavy scrub with a scrubbbing pad and
stripper solution such as Radical or equal.
3. Pick up solution with a wet vac.
4. Rinse with clean water and allow to dry.
5. Apply 2-3 coats of desired floor finish.
3 - 3
CARE & MAINTENANCE INSTRUCTIONS
