#160 - 21900 Westminster Highway, Richmond, B.C. V6V 0A8
Tel 604.818.6795 | Toll-free 1.888.824.3442 | Fax 604.278.9604
PREVENTION
The single greatest cause of damage to any floring or floor finish is abrasion from dirt and grit.
Wherever possible, use walk o
ff
mats at entrances and doorways. Vacuum or sweep the floor
often to remove any dirt and grit.
!
DRY MAINTENANCE VS. WET MAINTENANCE
A dry maintenance system has many advantages over a wet maintenance system, primarily
cost and hygienic and environmental impact.
• Dry maintenance systems use less than half the amount of cleaning chemicals over wet
systems and labor savings can be as great as 50%.
• To multiply, micororganisms need three basic things: food, warmth, and moisture. By using
a dry maintenance system you eliminate a basic element needed for microorganism growth.
• By eliminating or reducing the stripping and recoating of floor finishes, you reduce or
eliminate the dumping of heavy metals into the waste stream.
GENERAL
Use standard Maintenance Industry safety practices and precautions whenever performing
maintenance proceudures.
Every application and every building can present its own unique set of problems, which may
require variations in the maintenance prodecure. The following are general guidelines, which
will cover the majority of applications. If you feel your sitation is not covered by these
guidlines, please contact us for advice before beginning your maintenance procedure.
1 - 3
Care & Maintenance Instructions
CARE & MAINTENANCE INSTRUCTIONS
