Page 3 of 8
1700W Solar Battery Charger
Maximum Power Point Tracker
Operating Instructions
Please read these instructions before use
Model:
MPPT30-2L
BASIC WIRING OPTIONS:
Permanent Load Connection
(Figure 1):
Simplest wiring option where
the load is permanently
connected and the batteries
are not protected from over
discharge.
Wiring With Over Voltage Disconnect (Figure 2) :
This option protects the Load from receiving a High Voltage. The MPPT voltage goes over 1V above its maximum
programed value.This protects the load from overvoltage spikes such as disconnection of the battery, or faults with in
the system. Most LiFePo
4
are fitted with over voltage disconnects from their onboard charge controllers and are already
protected against Over Voltage.
Disconnect
ed
Connect
ed
Panel +
Panel -
B
Battery -
MIHV
MPPT
Disconnect
ed
Connect
ed
Panel +
Panel -
B
Battery -
MIHV Remote LED
MIHV
MPPT
Load -
