GSi PNEG-2309, Инструкция по установке и эксплуатации

Страница: 19 / 58

3
Mixer Parts and Specifications
Topics Covered in this Chapter
▪ Mixer Specifications
▪ Mixer Dimensions
▪ Service Parts (4-Ton Mixer)
▪ Service Parts (8-Ton Mixer)
Mixer Specifications
Gear Reducer
Table 3-1 Reducer technical data
Mixer Reducer
Mechanical Rating
(HP)
Adjusted Thermal
Rating (HP)
Drive Shaft Size
(in.)
Actual Service
Factor
4-Ton TA8407H40 77.35 51 4-7/16 1.93
8-Ton TA10507H40 114.13 89 5-15/16 1.52
NOTE:
1. For 4-Ton Reducer: Thermal rating is 51 HP based on 95°F and below ambient
temperature and up to 5,000' altitude.
2. For 8-Ton Reducer: Thermal rating is 89 HP based on 95°F and below ambient
temperature and up to 5,000' altitude.
Belt Drive
Table 3-2 Belt drive technical data
Mixer
Speed Ratio
Belt Speed
(ft./min)
Belt Pull
(lbs.)
Static Shaft Load
(lbs.)
Service Factor
Final Shaft Output
(RPM)
4-Ton 1.27
3,207 1,234 1,211
2.06 35
8-Ton 1.67
4,078 1,072 1,078
1.57 26
Table 3-3 Belt drive technical data (Contd.)
Mixer
Center Distance
(in.)
Facewidth
(in.)
Driver Pitch
Diameter (in.)
Driven Pitch
Diameter (in.)
Install/Take-up Center
Distance Range (in.)
4-Ton 40.4 3.06 7.00 8.90 39.35 - 41.85
8-Ton 51.1 3.06 8.90 14.90 50.07 - 53.27
PNEG-2309 Horizontal Fertilizer Mixer 19