GSi PNEG-1583 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 28

GSi PNEG-1583 Скачать руководство пользователя страница 6

6 PNEG-1583

10" Commercial Replacement Drive Kit

2. Safety

Safety Instructions

Our foremost concern is your safety and the safety of others associated with this equipment. We want
to keep you as a customer. This manual is to help you understand safe operating procedures and some
problems which may be encountered by the operator and other personnel.

As owner and/or operator, it is your responsibility to know what requirements, hazards and precautions
exist, and to inform all personnel associated with the equipment or in the area. Safety precautions may
be required from the personnel. Avoid any alterations to the equipment. Such alterations may produce
a very dangerous situation where SERIOUS INJURY or DEATH may occur.

This equipment shall be installed in accordance with the current installation codes and applicable
regulations which should be carefully followed in all cases. Authorities having jurisdiction should be
consulted before installations are made.

Follow Safety Instructions

Carefully read all safety messages in this manual and
safety signs on your machine. Keep signs in good
condition. Replace missing or damaged safety signs. Be
sure new equipment components and repair parts include
the current safety signs. Replacement safety signs are
available from the manufacturer.

Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.

Keep your machinery in proper working condition.
Unauthorized modifications to the machine may impair
the function and/or safety and affect machine life.

If you do not understand any part of this manual or need
assistance, contact your dealer.

Read and Understand Manual

Install and Operate Electrical Equipment Properly

Electrical controls should be installed by a qualified electrician
and must meet the standards set by the National Electrical Code
and all local and state codes.

Disconnect and lock out all power sources before installing
wires/cables or servicing equipment.

Electric Shock Hazard

«
...
4
5
6
7
8
...
»

Содержание PNEG-1583





























Отзывы:

Нет отзывов