GSi BFT 12, Инструкция по сборке, Страница: 9 / 88

Bulk Feed Tanks
9
PNEG­257 12'­21' BFT
Properly Store Grain Bin/Silo
Materials Prior to Construction to
Prevent Wet Storage Stain:
Wet storage stain (rust) will develop when closely packed bundles of galvanized material
such as sidewall and roof sheets have moisture present from any source. Roof and sidewall
bundles should be inspected on arrival for the presence of moisture. If moisture is present,
moisture must not be permitted to remain between the sheets. In the case of moisture
presence, sheets or panels should be separated immediately, wiped down, dried and
sprayed with a light oil or diesel fuel.
Where possible, sidewall bundles, roof sheets and other closely packed materials should be
stored in a dry, climate controlled building. Storage inside a dry building should be done if at
all possible. Where outdoor storage is unavoidable, the materials should be raised out of
contact from the ground or vegetation. Stacking and spacing materials should not be
corrosive or wet. Materials must be protected from the weather. Weather protection that
permits more air movement around the bundles is best.
The storage method of the roof bundles and sidewall sheets may also help minimize
moisture presence. Roof bundles should be stored inclined. The bundles should be stored
and secured in a safe & stable manner. Turning the bundles over and storing with the center
of the dome “up” like a arch is an option. Sidewall bundles may be stored on edge,
however
these bundles should be secured in such as way as they cannot fall over and cause
injury.
Should “white rust” or “wet storage stain” occur, contact the manufacturer immediately
concerning methods to minimize the adverse effect upon the galvanized coating.