GSi BFT 12 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 88

GSi BFT 12 Скачать руководство пользователя страница 4

Bulk Feed Tanks

4

PNEG257

12'21' BFT

READ THIS MANUAL carefully to learn how to
properly use and install equipment. Failure to do
so could result in personal injury or equipment
damage.

INSPECT the shipment immediately upon
arrival. The Customer is responsible for ensur
ing that all quantities are correct. Report any
damage or shortages by recording a detailed
description on the Bill of Lading to justify the
Customer’s claim from the Transport Firm. Our
responsibility for damage to the equipment
ends with acceptance by the delivering carrier.
Save all paperwork and documentation fur
nished with any of the equipment/components.

THIS MANUAL SHOULD BE CONSIDERED a
permanent part of your equipment and should
be easily accessible when needed.

Introduction

WARRANTY is provided as part of the
company’s support program for customers
who use and maintain their equipment as
described in the manual. The warranty is
explained on the warranty page located on the
inside back cover of this manual.

This warranty provides you the assurance that
the company will back its products where
defects appear within the warranty period. In
some circumstances, the company also
provides field improvements, often without
charge to the customer, even if the product is
out of warranty. Should the equipment be
abused, or modified to change its performance
beyond the factory specifications, the warranty
will become void and field improvements may
be denied.

«
...
2
3
4
5
6
...
»

Содержание BFT 12

























































































Отзывы:

Нет отзывов