manualshive.com logo in svg

GSi AIRSTREAM, Руководство пользователя, Страница: 9 / 34

Поделиться
Скачать
GSi AIRSTREAM Скачать руководство пользователя страница 9

8

Vacuum Option for the Expanded Aspirator

The Vacuum Hose Option provides
and additional cleaning function.
This option allows quick clean-up of
the dryer location and the inside of
the dryer plenum.  An air cutoff slide
plate is included with this option.  The
air cutoff slide removes the settling
chamber from the system providing
maximum vacuum to the vacuum
hose.  When using the vacuum hose,
the T-valve should be set so the
suction to the top duct is removed
from the system. 

 It is not

recommended that objects such as
rocks be vacuumed into the system
as damage to the fan will occur.

Vacuum Hose Option

INSTALLATION

Bolt the Vacuum Hose Adapter
Weldment to the Settling Box
Fan Side.

Place the 

Slide Valve Spacers (2)

 onto the 

Settling Box Fan Side

with holes aligned.
Place the 

Slide Plate

 onto the box side between the spacers with the

angle away from the 6" hole.
Align the slide plate end of 

Vacuum Hose Adapter Weldment

 with

Settling Box Fan Side

 so the 2" tube points down.

Bolt the 

Vacuum Hose Adapter Weldment

 to the 

Settling Box Fan

Side

 using the 

5/16" Whiz Nuts and Bolts

 provided.

Check slide plate movement.  The plate should fit snugly as not to move
when it is in the closed position.

Drill the dimples on the
Settling Box Fan Side.

Set the 

Settling Box Fan Side

 so the 6" hole side is up.

Drill the dimples located around the 6" hole using a 3/8" drill bit.

NOTE:

   This step should be completed before the

      Aspirator Settling Box is assembled.

Attach the Vacuum Hose to the
Vacuum Hose Adapter
Weldment.

Attach the 

Vacuum Hose

 to the 2" tube on the bottom of the 

Vacuum

Hose Adapter Weldment.

Work the hose in a back and forth twisting motion to work 1.00" of the
hose onto the tube.

Vacuum Option installed for Expanded Aspirator.

Содержание AIRSTREAM



































Отзывы:

Нет отзывов