GSi Agri-Alert 128 Touch, Руководство по установке и настройке

Страница: 11 / 120

Chapter 1: General Overview
WARNING
Do not use the phone card model PCB402 (300-00319) with any products other than
GSI Electronics Inc. products.
Automatic Dialers
Proceed as follows when programming emergency numbers and making test calls to emergency numbers:
• Remain on the line and briefly explain the reason for the call to the dispatcher.
• Program emergency numbers and make test calls in the early morning or late evenings not to inter-
fere in times where the volume of calls is higher.
Electrical safety advisory
Parties responsible for equipment requiring AC power should consider including an advisory notice in their
customer information suggesting the customer use a surge arrestor. Telephone companies report that
electrical surges, typically lightning transients, are very destructive to customer terminal equipment con-
nected to AC power sources. This has been identified as a major nationwide problem.
Alarm dialing equipment
Notice for Equipment Utilizing A Functionally Equivalent Arrangement to Provide Line Seize Capability
CAUTION
Verification of Line Seize capability should be made immediately after installation,
and periodically thereafter, in order to ensure that this equipment can initiate a call
even when the telephone is connected to the same line is in use.
CAUTION
To ensure proper operation, this equipment must be installed according to the
enclosed installation instructions. To verify that the equipment is operating properly
and can successfully report an alarm, this equipment must be tested immediately
after installation, and periodically thereafter, according to the enclosed test instructions.
Notice for Equipment with Line Seize Capability using an RJ31X or RJ38X Jack
895–00677 Agri Alert 128 Touch 11