background image

8

PNEG-1499     High / Low Thermostat

Roof Damage Warning And Disclaimer

GSI DOES NOT WARRANT ANY ROOF DAMAGE CAUSED

BY EXCESSIVE VACUUM OR INTERNAL PRESSURE FROM

FANS  OR  OTHER  AIR  MOVING  SYSTEMS.  ADEQUATE

VENTILATION AND/OR "MAKEUP AIR" DEVICES SHOULD

BE PROVIDED FOR ALL POWERED AIR HANDLING SYS-

TEMS. GSI DOES NOT RECOMMEND THE USE OF DOWN-

WARD FLOW SYSTEMS (SUCTION). SEVERE ROOF DAM-

AGE CAN RESULT FROM ANY BLOCKAGE OF AIR PAS-

SAGES. RUNNING FANS DURING HIGH HUMIDITY/COLD

WEATHER CONDITIONS CAN CAUSE AIR EXHAUST OR

INTAKE PORTS TO FREEZE.

SAFETY

General Safety Statements

Thank you for choosing a GSI Group product.

It is designed to give excellent performance and ser-

vice for many years.

It is the plan of The GSI Group to improve its

product whenever possible and practical to do so.  We

reserve the right to change, improve, and modify prod-

ucts at any time without obligation to  make  changes,

improvements, and modifications on equipment sold pre-

viously.

The principal concern of the The GSI Group Inc.

("GSI") is your safety and the safety of others associ-

ated with grain handling equipment. This manual is writ-

ten to help you understand safe operating procedures,

and some of the problems that may be encountered by

the operator or other personnel.

As owner and/or operator, it is your responsibility to

know what requirements, hazards and precautions ex-

ist, and to inform all personnel associated with the equip-

ment,  or  who  are  in  the  dryer  area.   Avoid  any  alter-

ations to the equipment.  Such alterations may produce

a very dangerous situation, where serious injury or death

may occur.

THIS MANUAL DESCRIBES THE INSTALLATION

AND OPERATION OF A DIGITAL HIGH/LOW THER-

MOSTAT.  

THIS  PRODUCT  IS  AN  IDEAL

ACCESSORIY  TO  THE  HEATERS  USED  FOR  THE

CONDITIONING OF CORN, SOYBEANS, AND OTHER

SELECT  GRAINS.   ANY  OTHER  USE  IS  CONSID-

ERED A MISUSE OF THE PRODUCT.

Содержание PNEG-1499

















Отзывы: