GSI Group PNEG-1451, Руководство по установке

Страница: 50 / 118

6. 2.66" Corrugated Commercial Hopper Tank 10-22 Rings
50 PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks
Eave Adjustable Braces
The eave adjustable braces must be attached at this time. An eave adjustable brace is comprised of one
large diameter tube and two (2) smaller tubes.
(See Figure 6G.) Slide the smaller tubes inside the larger
tubes and attach one smaller tube to the top of the ladder extension rail. Adjust the other smaller tube so
the bottom of the flattened tube reaches the roof panel. Field drill four (4) 5/16" holes through both large
and small tubes and bolt together using 1/4" x 1-1/2" bolts and nuts. This prevent the adjustable braces
from slipping.
(See Figure 6H.)
NOTE: Refer to Page 47 for proper location of ladder starter brackets.
Figure 6G
Figure 6H
NOTE: Refer to Figure 4A on Page 12 for additional details for standoff bracket to ladder assembly and
cage hoop bracket to ladder.