manualshive.com logo in svg

GSI Group PNEG-1445, Руководство по сборке и эксплуатации

Поделиться
Скачать
GSI Group PNEG-1445 Скачать руководство пользователя страница 40

40

PNEG-1445 6", 8", 10", & 12" Custom Augers

7.  OPERATION/MAINTENANCE

Maintain the Auger

ALWAYS shutdown and disconnect the power supply before adjusting, servicing or cleaning the 
equipment.

1. Use caution when repairing or replacing equipment parts.

2. Make sure ALL decals are legible and tightly attached to the auger. If necessary, replace  

them 

FREE OF CHARGE

 by contacting your dealer or the manufacturer.

3. Ensure that ALL electric motors, etc. are operating at the proper speed.

4. Maintain proper adjustments on the belt(s).

5. Mount controls for any electric motors at a safe distance from the machine and in a location 

accessible in case of an emergency.

6. Make sure ALL electrical wiring is not damaged, and that it meets proper wiring codes.

7. Make sure ALL components are in good working condition before use.

8. Check the auger flighting to make sure it is in good working condition.

9. Check the internal bearing bracket, bearing and universal joint to make sure they are in 

good working order.

10. Grease bearing at least two (2) times each season.

DANGER

Содержание PNEG-1445





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды