manualshive.com logo in svg

GSI Group PNEG-1049, Руководство по сборке и эксплуатации

Поделиться
Скачать
GSI Group PNEG-1049 Скачать руководство пользователя страница 5

PNEG-1049

 10"-12" Commercial Bin Sweep Augers

5

2. Safety

Safety Guidelines

Safety guidelines are general-to-specific safety rules that must be followed at all times. This manual is 
written to help you understand safe operating procedures and problems that can be encountered by the 
operator and other personnel when using this equipment. Save these safety guidelines for future 
reference.

As owner or operator, you are responsible for understanding the requirements, hazards, and precautions 
that exist and to inform others as required. Unqualified persons must stay out of the work area at all times.

Alterations must not be made to the equipment. Alterations can produce dangerous situations resulting in 
SERIOUS INJURY or DEATH.

This equipment must be installed in accordance with the current installation codes and applicable 
regulations, which must be carefully followed in all cases. Authorities having jurisdiction must be consulted 
before installations are made.

When necessary, you must consider the installation location relative to electrical, fuel and water utilities.

Personnel operating or working around equipment must read this manual. This manual must be delivered 
with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the 
equipment.

ST-0001-3

Содержание PNEG-1049

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды