10
Foreword
Thank you for purchasing a Temperature & Minimum-speed socket
controller. The Temperature & Minimum-speed socket controller is a speed
regulator for ventilated rooms to control air fans. The function of all fan
controllers involves maintaining a room at constant temperature and at the
same time creating a continuous minimum-speed in order to prevent
odours escaping.
The warranty is only valid with a warranty card containing sales date
and stamp from the place of purchase
о
r electronic registered warranty at
http://g-systems.eu/warranty
. If this is not so, please return immediately
to the sales office!
Warranty
EN
Legend
Installation
Insert the air fan into the
(5)
socket. Connect the
(7)
temperature
sensor which is provided with a 2 m long cable into the controller and a point
for the sensor where you wish to undertake the measurement.
Ensure that this is not directly exposed to a heat source or stream of
light in order to obtain the most precise measurement of the ambient air
possible. Now insert the controller
(6)
plug into the wall-socket. The fan
controller initialises itself, this can last up to 10 seconds and the
(3)
green
ON LED light flashes and the fans run at 50 % of their power. Following
initialisation
(3)
green ON LED lights up continuously - the fan controller
regulates from this point onwards.
1. Temperature setting
2. Minimum speed setting
3. Power ON LED light
4. Temperature LED light
5. Socket
6. Plug
7. Temperature sensor
Temperature min. speed socket controller
