Operation Instructions
Example: To Change the Relay Time to 15 seconds
Changing Relay Time
Code Description
3 Changing the Relay Time
Enter
Engineer
Code
+
+
+
Present Finger
to Confirm
8
Example: To Enrol a Users Fingerprint in User Location 22
To enrol a users fingerprint , the users finger must be presented ‘
twice
’ to the
scansensor window. The scan sensor must get 2 good quality readings to have a
successful enrolment.
As per the steps above present the finger to the sensor window until confirmation
beep is heard and Red Led turns off momentarily. Remove and re-present the
finger for the second time to complete the enrolment. A successful enrolment will
be followed by an Access Granted Tone.
Example: To Remove Users Fingerprint from User Location 34
Enrolling and Removing Users
Code Description
1 Enrol a User Fingerprint
2 Remove a User Fingerprint
Enter
Engineer
Code
+
+
Code = 1
Note: Refer to pages 6 & 7 for correct/incorrect finger placement.
Enter
Engineer
Code
+
+
User Loc. = 22
+
Present Finger
to Enroll
+
Present Finger
to Enroll
Code = 2
User Loc. = 34
Code = 3
Seconds = 15
Amber LED flashes
Red LED flashes
Red LED flashes
Amber LED flashes
Red LED flashes
Amber LED flashes
Amber LED flashes
Red LED flashes
Red LED flashes
To re-attach Security Caps simply align
tabs into holes as shown above and
ease the Caps back into place using
a flat bladed screwdriver.
Finger Print Switch is mounted to pattress box using security
screws provided. Both Security Caps are
then clipped onto Finger Print
Switch.
Flush Mounting
To release Security Caps push a
flat bladed screwdriver into slots
on the side and pull forward gently.
5
Wiring Diagrams
