EN
16 |
www.homepluss.es
INTRODUCTION
Thank you for the purchase of our quality product. Used carefully and in accordance with the instructions set
out below. Please read and keep these instructions for future reference.
CLEANING
Cleaning and maintenance to be carried out by the
user must not be carried out by children without
supervision.
Children should not play with the section.
To maximize the efficiency of the heater, clean regu-
larly.
1. Set the power switches to the “OFF” position,
unplug and let the heater cool down.
2. Clean the surfaces with a soft, damp cloth. Do not
use detergents or abrasives as this could scratch the
surface.
3. Make sure the grates are free of dust, as this will re-
duce air flow. The accumulated dust can be removed
with a soft cloth or a vacuum cleaner.
4. Let the surface dry completely before using the
heater again.
FAULTS
1.
Take the appliance to an authorised tecnhical su-
pport service if problems arise.
2.
Do not try to dismantle or repair withut assistance,
as this may be dangerous.
3.
If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in case of damage.
CAUTION!
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the applian-
ce. Cleaning and user maintenance shall not be made by
children without supervision.
PARTS
1. Body frame.
2. Base plate.
3. Butterfly nuts. (2 pcs) .
4. Tip-over safety switch rod.
5. Power cord cable.
6. Cord.
MOUNTING
- Assemble the body frame and the base plate
together following the sequences.
- Remove the butterfly nuts from the lower part
of the body frame.
- Insert the power cord through the slot placed
in the middle part of the basement and then
assemble the body frame to the base plate.
- Secure the body frame to the base plate by
means of the 2 butterfly nuts previously removed.
- Insert the power cord through the suitable slots
and then fix it by the clamp.
HOW TO USE
- Plug in the appliance. Check that the owlet has
at least 10A current carrying capacity.
- Selected the heating power needed by pressing
the ON switches, one time for 400W, 2 for 800W
and 3 for 1200W.
- Press the OFF button to switch the heater off.
- Press the TURN switch to make the heater os-
cillate. Press it again to switch off the oscillating
movement.
