USER MANUAL
50
1.
The Rule Number is the number of FD areas. You can set a max of 4 areas for FD function.
2.
Rule Switch
enables or disables the function.
3.
Choose a
Rule Type
, only Normal is available for this detection.
4.
Click 4 points in the picture to draw a virtual region. The shape of the region should be a
convex polygon. A concave polygon will not be saved.
5.
Click
Save
to save your settings.
6.
If you want to adjust the size of the region, click the red box in the region, the borders will
become red. Click and hold with your mouse to move the whole region, or drag the corners to
resize the region.
7.
If you want to remove one of the regions from the picture, click the red box in the region and
click
Remove
. Click
Remove All
to delete all regions.
Notice:
1) The region for detection should not be in an area that people cannot reach.
2) The region should include the face completely.
Alarm
: Click
to enter the
parameter setting
of FD:
Channel
: Select the channel you want to configure
Buzzer
: Disable or enable the buzzer’s alarm tone. Can be set to 10, 20, 40 or 60 seconds when
the detection is triggered
Alarm Out
: If your DVR supports a connection to an external alarm device, you can set it to emit
an alarm tone.
Latch Time
: Configure the duration of the external alarm when the detection is triggered.
Record:
Select the channel(s) you want to record when a detection is triggered.
Post Recording
: You can set how long the DVR will continue to record after an event has occurred.
