5
Dual clamp to eyelet conversion
The charger is supplied with clamps that feature integrated eyelets. To convert the
clamp into an eyelet, simply remove the retaining screw and washer. To reattach
the clamps, follow this process in reverse (image 1).
1
2
The eyelets can be used for permanent connection to a battery whilst it is fitted
in a vehicle. They should be securely tucked out of the way and connected to the
charger when using the connection plug when charging is required (image 2).
Selecting the correct charging rate
This charger is designed for 6V and 12V conventional lead acid and LiFePO4
batteries. The Ampere hours (Ah) capacities shown below are to be used as a
general guide only. Always refer to the battery manufacturer’s specifications and
recommendations for your charging requirements. This charger is recommended
for long term battery maintenance.
YCX1.5
Charge rate
1.5A
Charging
2-30Ah
Maintenance
Up to 130Ah
LED charging indicators
Fast flash =
0.2S ON and 0.2S OFF
Blinking =
0.2S ON and 1.8S OFF
Flashing =
0.5S ON and 0.5S OFF