GS Instruments Protek 7830 Скачать руководство пользователя страница 5

Страница: 5 / 91

Safety Instruction



No Unauthorized Disassembling

Do not remove the instrument cover. Only GS Instruments’ Service technicians are

allowed to repair the instrument.

Instruments that appear damaged or defective

should be secured against unintended operations until they are repaired

by qualified service technicians. Also, unauthorized disassembling makes

the warranty void.



Keep the power connectors clean

Instrument’s power connectors should remain dust free.

Clean the power connectors regularly. Dust could result in damage to this instrument.

Also, continually cleaning the dust on the input terminal of RF frequency counter.

Clean the input terminal regularly. Dust could result in damage to the instrument.



RF in/output rating

Rating of RF input and output connector

Maximum DC voltage rating

RF input connector (socket): N type female, 50Ohms

Maximum RF input power: 5Vrms

Caution: Do not use over 5Vrms supplied and/or (-) power could result in damage to this

instrument

Do not operate this instrument if there is any doubt it is functioning properly: if

operating personnel feel the instrument is not operating properly, return this instrument

to GS Instrument for service and repair to ensure the safety features are maintained.

Содержание Protek 7830




























































































Результаты поиска

Содержание Protek 7830

Отзывы:

Похожие инструкции для Protek 7830

Бренды по названию

Популярные бренды

GS Instruments Protek 7830, Руководство пользователя

Результаты поиска

Содержание Protek 7830

Отзывы:

Похожие инструкции для Protek 7830

Бренды по названию

Популярные бренды