22
Instructions manual |
www.grupotemper.com
KMD 06
Digital multimeter
jack.
• Connect the red test lead to the positive (+) end and the black test lead
to the negative (-) end of the battery and read the measurement on the
display
Warning
To prevent injury or damage to the meter, do not connect the meter to a
battery with a voltage rating exceeding 60V AC or 30V DC.
Specifications
General specifications
Safety Rating:
CAT III, 600V; pollution degree II
Operating altitude:
<2000m
Operating Temperature/
Humidity:
0°C to 40°, <80% RH
Storage Temperature/
Humidity:
-10°C to 60°C, <70% RH, remove battery
Max. Input between terminals
and earth ground:
600V DC or AC rms
Fuse protection:
10A range: F1: F 10A H 600V
mA range: F2: FF 400mA H 600V
Sample rate:
Approx. 3 times/sec.
Display:
3 ½ digit LCD display
Overload Indication:
Display shows OL
Low Battery Indication:
When battery voltage drops below normal
operating voltage,
is shown on the
display.
Polarity Indication:
Display automatically displays
“
-
”
Power Source:
1 x 9V battery
