www.grunkel.com
21
5.
For correct operation, the oven must have sufficient airflow. Allow 20cm of
space above the oven, 10cm at back and 5cm at both sides. Do not cover or block any
openings on the appliance. Do not remove feet.
6.
Do not operate the oven without glass tray, roller support, and shaft in their
proper positions.
7.
Make sure that the power supply cord is undamaged and does not run under
the oven or over any hot or sharp surface.
8.
The socket must be readily accessible so that it can be easily unplugged in an
emergency.
9.
Do not use the oven outdoors.
RADIO INTERFERENCE
Operation of the microwave oven can cause interference to your radio, TV, or similar
equipment.
When there is interference, it may be reduced or eliminated by taking the following
measures:
1.
Clean door and sealing surface of the oven.
2.
Reorient the receiving antenna of radio or television.
3.
Relocate the microwave oven with respect to the receiver.
4.
Move the microwave oven away from the receiver.
5.
Plug the microwave oven into a different outlet so that microwave oven and
receiver are on different branch circuits.
GROUNDING INSTRUCTIONS
This appliance must be grounded. This oven is equipped with a cord having a
grounding wire with a grounding plug. It must be plugged into a wall receptacle that is
properly installed and grounded. In the event of an electrical short circuit, grounding
reduces risk of electric shock by providing an escape wire for the electric current. It is
recommended that a separate circuit serving only the oven be provided. Using a high
voltage is dangerous and may result in a fire or other accident causing oven damage.
WARNING Improper use of the grounding plug can result in a risk of electric shock.
Note:
1.
If you have any questions about the grounding or electrical instructions, consult
a qualified electrician or service person.
2.
Neither the manufacturer nor the dealer can accept any liability for damage to
the oven or personal injury resulting from failure to observe the electrical connection
procedures.
The wires in this cable main are colored in accordance with the following code:
Green and Yellow = EARTH
Blue = NEUTRAL
Brown = LIVE
