Grundig YB 218, Руководство пользователя

Страница: 7 / 14

Batteries
• Open the battery compartment and insert 3 alkaline batteries of
the type R6, UM 3 or AA.
• Remove the batteries when they are exhausted or if they are not
going to be used for a long period of time.
Note: If the DC 4.5 V
+<-
socket is in use, the battery supply
will switch off automatically.
Note on Environmental Protection
Do not throw exhausted batteries in the household
refuse.
Hand over the old batteries to your dealer or public
collecting points when buying new ones.
Warning for weak batteries :
When the batteries run low, the sound volume declines gradually.
The indication appears on the display. Continued operation
with low batteries causes the radio to turn off
automatically, other malfunctioning and losing programmed time
settings. In this case, remove the batteries and press a paper clip
through the
RESET
hole.
Readjust the time settings. To prevent that the radio is switched on
accidentally, use the
LOCK
-switch when packing the radio or putting
it away.
YB 218 page 16
16
POWER SUPPLY
GB
AC Mains adapter (not included)
You can connect the set to the mains using a
mains adapter.
Only use a mains adapter which supplies 4.5 V
DC with the negative pole at the centre pin of the
plug (
+<-
).
Before connecting the mains adapter
• Check that the mains voltage indicated on the type plate of the
adapter matches your local mains voltage.
• If the mains adapter is equipped with a voltage selector, set this
to the local voltage.
• Connect the mains adapter to the DC 4.5 V
+<-
socket of the
set and to the wall socket.
Power failure
– If the power supply is interrupted, the programmed time settings
will be kept in the memory for 30 seconds.
– If the AC power is disconnected from the 4.5 DC socket, the
batteries (if present) will take over the supply.