Grundig YB 218, Руководство пользователя

Страница: 11 / 14

You can use your world receiver as an alarm clock. To use this
function you first have to set the alarm time. You will be woken with
a tone, or by the radio.
Setting the alarm time
• Press STANDBY .
–
STANDBY
and
0:00
starts flashing on the display.
• Use the HOUR key to set the hours and the MINUTE key to set
the minutes (in the same way as the clock time).
• Press
OK
to store the setting
– If you do not press
OK
, the display will return to the previous
time setting after 5 seconds.
Selecting the alarm mode
• Use the
OFF
key to select the alarm mode. The
symbol for the selected alarm mode will appear
on the display:
= alarm by radio
= alarm by sound signal
= alarm off.
• Press OK to store the setting
Alarm by radio
• If you select alarm with radio, tune to a station which will be
broadcasting at the alarm time and adjust the volume to the
required level.
– At the preselected alarm time, the radio will switch on and
switch off again automatically 60 minutes later.
STANDBY
STANDBY
HW
STANDBY
HWS
YB 218 page 20
20
ALARM
GB
Alarm by sound signal
• If you have selected the sound signal alarm, the tone will
sound for approximately one minute, becoming louder at
intervals.
– This is followed by one minute’s silence, after which the
alarm tone will sound again.
– If the alarm is not switched off, this process is repeated a
total of 30 times, after which the appliance will switch itself
off automatically.
Interrupting and repeating the alarm
• The alarm can be interrupted by pressing any button other than
the ON/OFF button.
– After 3 minutes, the alarm comes on again.
• It is possible to interrupt the alarm function several times during
the switch-on period.
Switching the alarm off
• The alarm function can be switched off by pressing the
ON/OFF
button.
The alarm remains set to operate the next day.
Note:
The alarm function always refers to the time shown in the main (left)
time display.