41
ENGLISH
Tuning to radio stations
There are three ways to tune into stations: automatically – with the station search,
manually – with a step-by-step search through the frequencies, directly - by entering the
frequency number.
1
Press »
POWER
« to switch on the device.
2
Press »
FM MW SW1 SW2
« to set the waveband.
Note:
If you have set short wave, select the band you want (see the table on page 26). Press
»
METER
« repeatedly.
Automatically
1
Keep pressing »
H
A
« or »
M
S
« until the frequency switches to rapid run-through.
– The search stops when a station with good reception is found.
SETTINGS
_____________________________________________________________
02_Yacht_Boy_2000.ENG 08.06.2006 14:43 Uhr Seite 41
