Grundig WTR 3000 BT, Руководство пользователя

Страница: 10 / 95

ENGLISH 10­ ­
RADIO­MODE
------------------------------------------------------------------------------------------------------------------------
General­functions
Switching­on­and­off
1 Press » ON/OFF « to switch the device on and
off.
Adjusting­the­volume
1
Rotate volume knob to adjust the volume.
Adjusting­the­tone
1 Open the menu with » Menu «.
2
Select the option »
System Settings
«
with »
r
­
e
« and confirm by pressing »
OK/i
«.
3
Select the option »
EQ
« with
»
r
­
e
« and confirm by pressing »
OK/i
«.
– Display e.g.: »
My EQ
«.
4 Select the desired option with »
r
­
e
« and con-
firm by pressing » OK/i «.
5 Press » Menu « to end the display.
Listening­with­headphones
1
Connect the headphones to the »
PHONES
«
headphone jack (ø 3.5 mm).
– This switches off the loudspeakers.
Caution:
7
Excessive sound pressure from the earphones
or headphones can cause hearing loss.
FM­mode
For the best FM reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting­the­input­source­FM
1 Select the input source FM with » Mode/AL «.
– Display: the frequency of a FM radio station.
Selecting­stored­stations
1
Select the station you want using the preset
buttons »
1
« to »
5
« (presets 1 to 5) or using
» 5+­­ e II « and the preset buttons » 1 « to » 5 «
(presets 6 to 10).
Displaying­RDS­station­informations
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
Notes:­
7
It may take some time before all RDS infor-
mation is available.
7
GRUNDIG has no influence on the correct-
ness of such information.
1
Press »
OK/i
« repeatedly.
– The following display appears in succesion:
The name of the radio station, radio text (if
offered), station type (PTY), the current time
and date.
Listening­to­an­external­source
1
Use a standard audio cable to connect »
AUX­
IN « on the back of the device to an AUDIO
OUT socket on the external equipment.
2 Press » ON/OFF « to switch on the device.
3 Select the input source for the external device
with » Model/AL «.
– Display: »
AUX IN
«.
4
Rotate volume knob to adjust the volume .
5
Start playback on the external device.
Note:­
7
If no audio signal is available on socket
»
AUX­IN
«, the device switches automatical-
lyto Stand-by mode after 15 minutes. Forfur-
ther use switch on the device again.