EN
GLISH
11
SETTINGS
----------------------------------------------------------------------------------------------------
Tuning television stations automatically
The television is equipped with automatic tuning.
You start the search and can then sort the television stations into your
order of preference.
There are 100 presets, to which you can assign TV stations from the
antenna or from the cable connection.
1
Press »
8
«, »
1…0
« or »
Λ
« or »
V
« to switch on the television from
standby mode.
– The »Auto-Suche starten« (Initial Auto Search) menu appears
when the television is first switched on.
Help:
If the »Auto-Suche starten« (Initial Auto Search) menu does not
appear on the screen, follow the instructions on retuning all tele-
vision stations on page 32.
2
Select the country with »
–
« or »
+
« and press »
« to confirm.
3
Select the »Sprache« (Language) item with »
V
« and press »
«
to confirm.
Select your language with »
–
« or »
+
« and press »
« to confirm.
4
Select »Auto Program« with »
V
« and press »
« to start the
search.
– The automatic search may last a few minutes, depending on
the number of television stations found.
– After the search, the television switches to preset 1.
Changing stored stations
If stations were stored with the automatic station search while tuning
the television stations, you can delete them.
You can also store stations on a different preset , change or enter the
name of a station , as well as skip or block presets.
Opening the channel list
1
Press »
i
« to open the main menu.
2
Select the »SETUP« menu by pressing »
V
« or »
Λ
« and confirm
with »
«.
3
Select the »Program Table« by pressing »
V
« or »
Λ
« and con-
firm with »
«.
Note:
Additional operations are explained in the section on the follow-
ing page.
Auto-Suche starten
w
r
OK
e
q
Land
Sprache
Autoprogrammierung
1
Deutschland
Auto-Suche starten
w
r
OK
e
q
Land
Sprache
Autoprogrammierung
1
OK: Untermenü öffnen
SETUP
w
r
OK
e
q
Auto Search
Installation
Program Table
Factory Settings
1
OK: Enter sub-menu
