Grundig Vision 2 16-2930 T, Руководство пользователя, Страница: 33 / 37

ENGLISH
34­
INFORMATION
­------------------------------------------------------------------------------------------------------------------
Displaying­signal­information
(only for digital television channels)
1 Open the menu with » M «.
– The »PICTURE« menu appears.
2 Select the menu »CHANNEL SETUP« with
»
r
« or »
e
«.
3
Select »Signal Information« with »
q
« or »
w
«
and press » OK « to confirm.
– You will see information on the channel,
modulation, quality and signal strength.
Notes:
7
The lower section of the menu shows the
signal properties. The further the bar for
»quality« and »Signal Strength« extends to
the right, the better the reception signal.
7
The signal level not only depends on your re-
ceiver system, but also on the channel which
is currently active. Remember this when
aligning your antenna using the signal level
display.
4 Press » M « to end the display.
Automatic­software­update
(Only for digital television channels)
If this function is enabled, the device automati-
cally searches for new software and updates it if
a new version is available.
1 Select the line »Automatic Update« with »
q
«
or »
w
« and confirm using » OK «.
2
Press »
r
« or »
e
« to switch the function on or
off.
3
Press »
M
« to end the setting.
Updating­software
(only for digital television channels)
1
Open the menu with »
M
«.
– The »PICTURE« menu appears.
2 Select the »OPTIONS« menu with »
r
« or
»
e
«.
3 Select the »Software Update« menu by press-
ing »
q
« or »
w
«.
4 Press » OK « to start the software update.
– The software is updated automatically, if
possible.
5 Press » M « to end the setting.