Trio Touch
16
Selecting a Station
To find and play a FM station, touch the
Button to select the Auto Tune Function which will scan to the
next available station by pressing the
or
icons. The frequency display starts to run up or down as it scans
the FM band and stops when it finds an FM Radio Station.
You can also manually search for a particular frequency by deselecting the
icon and then pressing the
or
icons. You can also touch the frequency band to select an exact station.
To store an FM preset, touch the
Add Presets
icon and favourite added will be displayed on the screen. You can
select one of the 10 presets to store.
To select a preset, touch the
Preset
icon briefly, then select one of the listed preset stations displayed in My
Favorites.
Now Playing Information
While the stream is playing, the screen shows its frequency, or if RDS information is available, station name and any
further RDS information such as program name, track title and contact details. If no information is available, just the
frequency is shown. Stereo broadcasts are indicated with an icon at the top of the screen.
FM Settings
Scan Settings
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss) from weak
stations. To change the scan settings to stop at only stations with good signal strength touch the
FM Menu Bar
then select the
„
Stop On Stations
’
option. Then you will be able to select either
All
–this will
allow the Auto Tune to scan to all channels and
Strong
- this will set the Auto tune to only scan for strong stations.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise
ratio (hiss). To play weak stations in mono, touch the
FM menu bar
then select the
Forced
Mono
Option and press yes to confirm
.
FM Radio Mode