5
To disconnect the mains unit from the machine:
depress the catch on the connector and
simultaneously pull the cord.
Turning the machine on and off
Ǽ
Press the »
Ǽ
– POWER« button down to turn the machine on
and off.
– When on, the power light will illuminate.
– The following appears in the display:
Warning!
The desktop transcriber and the mains unit are only disconnected
from the supply voltage when the plug has been removed from the
power outlet!
Always disconnect the power supply unit during an electrical storm.
Do not pull it out by the cord.
Standby
If you do not select a function for more than 10 minutes, the machine
switches into “standby mode”. The parts that usually touch the tape
are released from the tape. The machine remains in standby mode
until reactivated.
Connecting accessories
Connecting the 536 foot control, 541 hand control and headset: see
figure at the beginning of this booklett.
The features indicated by Grundig apply only when using original
Grundig accessories.
Defects due to the use of accessories which are not original Grundig
accessories or which do not comply with the legal regulations or the
corresponding standards lead automatically to the expiration of any
guarantee rights.
min
STOP
LETTER
T CONTROL
ac 9V-10V
~
PREPARATION
_______________________________________________
ENGLISH
02 St 3221,GB 11.08.2005 12:50 Uhr Seite 5
