15
ENGLISH
INFORMATION ______________________________
Tips for blending
█
To add ice cubes to mixtures while the
blender is operating, add one cube at a time
through cap
A
. Wait a few seconds before
adding the next ice cube so that the blender
can properly blend the ice.
█
To add food while the blender is operating,
remove the cap
A
and drop the ingredients
through the opening. Be sure to cut the food
into about 2-5 cm pieces to fit through the
opening. Replace the cap
A
when you have
finished adding ingredients.
█
When blending solid foods, such as raw
vegetables, cooked or uncooked meats and
fruits always cut them into no larger than 2-5
cm pieces before placing them into the glass
jug. Blend no more than 2 cups of these foods
at a time. This will speed the blending process
and reduce wear on the blending blades.
█
Always place liquid ingredients in the glass
jug first, unless a recipe specifically states
otherwise.
█
To blend beverages, place all ingredients in
the glass jug at the same time.
█
Avoid overblending. Usually, you will need to
blend for a few seconds.
█
Overblending may cause food to become
mushy.
Cleaning and care
Caution
█
Never use petrol, solvents, abrasive cleaners,
or metal objects and hard brushes to clean
the appliance.
█
The blades of cutter unit are very sharp! Han-
dle the blades with utmost care in order to
avoid injuries.
█
Never clean the appliance with your bare
hands.
█
Clean the jug blender after each use. Do not
let any food remnants harden on and inside
the jug blender. This will make it more difficult
to clean it later.
█
Do not use boiling water. The blade assembly
bearings have been designed with a lifetime
lubricant; exposure to boiling water may dam-
age these bearings and shorten the life of the
blender.
1
Turn the appliance off and disconnect it from
the wall socket.
2
Allow the appliance to cool down.
3
Remove the glass jug
D
from the motor hous-
ing
H
. Rinse with water to remove any large
food particles that may have accumulated in
the glass jug.
4
Replace the glass jug
D
on motor housing
H
.
5
Place 1 to 1 ½ cups warm water with some
drops of mild cleanser into the glass jug
D
and switch to speed “4” for a few seconds.
Remove the glass jug from motor housing and
rinse with water. Repeat as necessary.
Note
█
Do not immerse the motorized base or blade
unit in liquid, or place them in the dishwasher.
Only the lid and the glass jug may be im-
mersed and placed in the dishwasher.
6
Use a damp soft cloth and some mild cleanser
to clean the exterior of the appliance.
7
Wipe the blender base, cutter unit
F
and lid
with a lint free cloth before the next usage.
Storage
If you do not plan to use the appliance for a
long period of time, please store it carefully.
Make sure the appliance is unplugged and com-
pletely dry.
Store the appliance in a cool, dry place. Make
sure the appliance is kept out of the reach of
children.
