14 ENGLISH
OPERATION _________________________________
Blending
1
Place the device on an even and dry surface.
The non-slip feet
J
ensure the stability of the
appliance.
2
Make sure that the power cord is discon-
nected from the power supply and the control
dial
I
is on “0” before putting food into the
glass jug
D
.
3
Take the glass jug
D
from the motor housing
H
by lifting the glass jug
D
upwards and
open the lid.
4
Now put the ingredients to be blended in the
glass jug
D
. The ingredients should only be
about 2-5 cm long.
Notes
█
Add water to ensure the jug blender functions
smoothly.
█
Mix 3 units of hard food and 2 units of water
in order to have a smooth jug blender experi-
ence. (i.e: 60 gr hard food 40 ml water)
Caution
█
Do not put or blend hot foods or liquids in
the glass jug. If you process soup, make sure
that the liquid temperature does not exceed
40°C.
█
To process crushed ice, we suggest you to
start with three quarters of ice in the jug and
add 15 ml of cold potable water.
█
Don´t try to crush ice without adding water
to the jug.
█
Never let the jug blender operate while
empty (without food).
█
Never let the jug blender operate without the
glass jug on the motor housing.
5
Close the lid
C
. Make sure that the cap/
measuring cup
A
is inside the lid opening
and is secured.
6
Place the glass jug
D
upright onto the motor
housing
H
.
Caution
█
Never move or turn the glass jug after it is
properly seated in the place.
7
Connect the power plug to a suitable power
outlet.
8
The cutting speed can be variably adjusted
with the control dial
I
.
Notes
█
To operate the blender at the low speed, turn
the control dial
I
to “1”.
█
If you want to blend with a higher speed, turn
the control dial
I
to the desired speed level
(2-4).
█
For short pulses of blending with a high
speed, turn the control dial
I
to “P”. When
you release the control dial
I
, the blender
will stop and return to “0” automatically.
█
If ingredients are to be added during the
blending process, then add them through the
opening in the lid
B
. To do this, take out the
cap/measuring cup
A
.
9
After the desired consistency of the blended
food has been reached, turn the control dial
I
to 0 to switch off the blender.
Caution
█
Never run the blender for longer than 1
minute, otherwise it would overheat.
█
After running the appliance for 1 minute, let it
cool down before using it again.
█
Be sure the motor is switched off and has com-
pletely stopped before removing glass jug
D
from the motor housing
H
.
█
Do not place any utensil (scraper, fork, etc.) in
the glass jug while blender is operating.
10
Pull the power plug out of the power outlet.
11
Take the glass jug
D
off from the motor
housing
H
by lifting the glass jug upwards
(do not try to rotate it) and open the lid
C
.
12
Take off the lid and pour the mixture into
glasses or other containers.
