Grundig SI 7450, Инструкция по эксплуатации

Страница: 10 / 14

10 ENGLISH
When setting the temperature of your appliance,
we recommend to consider the following table.
Fabric_
Type
Temperature_
Setting
Steam_
Setting
Synthetic • Without steam
Silk
•
Without steam
Wool •• Steam
Cotton ••• Steam
Linen -
Jeans
MAX Steam
4__
In order to learn the ironing temperature to be
used, check the garment’s care label.
5__ If you don’t know the fabric of your garment,
first iron a part that is not visible and determine
a correct ironing temperature for it.
6__ In order to prevent shiny stains that may form
on synthetic fabrics or silk, iron on the reverse
side of the fabric. Do not use the spray function
in order to prevent the stain formation.
Steam_ironing
1__ Set the desired steam level by pushing the
steam setting knob
I
.
2__
Set the required ironing temperature (see chap-
ter “Setting the temperature”). Make sure that
the temperature setting dial
B
is within the
range marked with the steam mark. When the
thermostat warning light
J
turns off, the sole-
plate temperature has reached the level to gen-
erate steam.
Vertical_steam_ironing
Note
7
Vertical steam ironing can be applied to hang-
ing curtains or clothes (suits, jackets and coats).
Caution_
7
Never direct the steam at people or pets.
1__ Set the desired steam level by pushing the
steam setting knob
I
.
2__ Hold the iron in a vertical position and press
the steam burst button
G
to steam iron your cur-
tains and your garments on the hanger.
Steam_burst
1__ During ironing, in order to remove the tena-
cious creases, you can gain strong steam by
pressing on the steam burst button
G
for 3-4
times with 5-second intervals.
2__
When you start to iron, steam burst may not
emit in your first couple of presses. In order to
gain steam burst, the temperature setting dial
G
should be at •• or a higher level.
3__ You can iron the creased parts of the garments
with the steam power which is obtained by
pressing the steam burst button
G
during steam
ironing. However if this process is maintained
without an interruption, water may also come
from the iron soleplate
D
along with the steam.
Water_spray
1__ Make sure there is sufficient water in the water
tank. Spray function can be used in order to re-
move tenacious creases by pressing the spray
button H during dry or steam ironing.
OPERATION_ ______________________________