Grundig SCN 120, Руководство пользователя

Страница: 13 / 17

ENGLISH ­13
Alarm­mode
The device has a dynamic alarm tone
that starts at a low volume and reach-
es its maximum volume within 30 to
45 seconds.
Viewing­the­alarm­time
1
Press »
VOLUME­ -/AL­ 1
« ones
(for alarm time 1) or press »
VO-
LUME­ +/AL­ 2 « (for alarm time
2).
– Display: the last set alarm time
1 or 2, the LED » AL­1­ ­­ « or
»
AL­2­ ­­
« flashes.
Note:
7
If no other button is pressed, the
device switches back automati-
cally to the current time after
10 seconds.
Alarm­with­radio­station
1 Press » ON/OFF « to switch on the
device.
2 Select the radio station using the
» - « dial.
3
Adjust the alarm volume by press-
ing » / HR « or » TUN-
ING-/MIN «.
OPERATION
­_____________________________________
4
Set the radio station you want as
an alarm signal (» «), and press
»
AL1 « or » AL­2 « twice.
– Display: the corresponding LED
» AL­ 1­ ­ ­ « or » AL­ 2­ ­ ­ «
lights up.
5 Press » ON/OFF « to switch off the
device.
– The device wakes you up at the
set time with the radio station
(alarm duration is 59 minutes).
Alarm­with­signal­tone
1 Press » ON/OFF « to switch off
the device.
2 Set the signal tone alarm signal
(» «), and press » AL­1 « or » AL­2 «
once.
– The device wakes you up at
the set time with the signal tone
(alarm duration is 59 minutes).
Interrupting­the­alarm
1 Press » SNOOZE « while the
alarm is sounding.
– The alarm signal (radio station
or signal tone) stops.
– The alarm goes on again at
9 minute intervals (alarm dura-
tion is 59 minutes).