Grundig SCN 120, Руководство пользователя

Страница: 10 / 17

­10 ENGLISH
Setting­time­and­day­of­the­
week
If the device has been switched on
for the first time – if no time signal
has been received – »
0:00
« ap-
pears in the display as a sign that
the time has to be set. The same ap-
plies after a power failure or if the
device has been disconnected from
the mains supply and no back-up
battery has been inserted.
1 Press » / HR « briefly to
set the hours step-by-step or hold
down to run through the hours
continuously.
2 Press » TUNING-/MIN « briefly
to set the minutes step-by-step or
hold down to run through the min-
utes continuously.
Notes:
7
When the minute display chang-
es from »
59
« to »
00
«, this does
not affect the hour display.
7
The device saves the set time
automatically after 10 seconds.
3 To set the day of the week, press
» TIME « and » SET « at the same
time.
– Display: for example, the day of
the week »
d1
« = Monday.
SETTINGS
­________________________________________
4
Set the day of the week (»
1
« =
Monday, »
2
«, »
3
«, »
4
«, »
5
«,
»
6
« or »
7
« = Sunday) using
» / HR « or
» TUNING-/MIN «.
– The device saves the selected
day of the week automatically
after 5 seconds.
Note:
7
Display the selected day of the
week and press »
SNOOZE «
longer than 3 seconds and hold
it pressed.
Setting­the­time­zone­
If you use the device outside of the
Central European Time Zone (CET),
you can correct the time by +/– 2
hours.
1 Press » TIME­ZONE/WEC « keep
pressed for approximately 2 sec-
onds.
– Display: »
00
«, »
:
« flashes.
2 Set the time zone with » TUN-
ING+/
HR
« or » TUNING-/
MIN
« (Scale: »
00
«, »
01
«, »
02
«,
»
-02
« and »
-01
«).
– Display: e.g. »
02
«.