Grundig SC 990, Руководство пользователя

Страница: 14 / 19

ENGLISH
14­
FM­MODE
­--------------------------------------------------------------------------------------------------------------------------------------
Selecting­the­tuner­input­
source
1
Press »
M
« repeatedly on the remote control
or on the device until »FM« appears on the
display.
Selecting­stations­–­from­pre-
sets
1 In the »FM« mode, press » 1 « to » +10 « on the
remote control to select the presets from 1 to
20 or press »
–­PRESET/ALBUM­+ « on the
device repeatedly until the required preset is
found.
– The frequency of the station and the preset
number appear on the display and the sta-
tion is played then.
Note:
7
To select presets from 10 to 20, press +10
and then the number button corresponding
to the ones' place. For example to select 18,
press »
+10 « and » 8 « consecutively.
Setting­stereo­or­mono­recep-
tion­(only­in­FM­radio­mode)
1
Press »
7
/
« on the remote control to switch
between stereo and mono modes.
Displaying­RDS­station­infor-
mation­
If the device is receiving a RDS station, the sta-
tion name and »R.D.S« appear on the display
(if no information is available, the reception fre-
quency appears on the display).
Station and track information appear as ticker
text (radio text). If radio text is not available,
other information can be displayed as an alter-
native.
1
To display information on the current RDS sta-
tion, press » DISPL « repeatedly.
– The following information appear:
The current programme type (PTY), e.g.
»
POP MUSIC
«. »
NO PS
«, »
NO TEXT
«, »
NO
TYPE
« appears if no information is avail-
able.
Note:
7
The information is displayed continuously
until »
DISPL
« is pressed again.
AUX­MODE
­--------------------------------------------------------------------------------------------------------------------------------
Listening­to­an­external­
source
You can listen to the audio signal from the ex-
ternal device connected through your device
speaker.
1
Use a standard audio cable (not supplied) to
connect » AUX « on the right side of the de-
vice to an AUDIO OUT socket on the external
equipment.
2­
Switch on the device from stand-by mode
by pressing »
8
« on the remote control or
»
ON/OFF
« on the device.
3
Press »
M
« repeatedly until »AUX« appears on
the display.
4 Start playback on the external device.