Grundig SC 990, Руководство пользователя

Страница: 10 / 19

ENGLISH
10­
Initial­setup
When the device is connected to the mains
for the first time, »
0:00
« starts flashing and
»
WELCOME TO ...
« appears on the display.
Searching­for­and­saving­FM­
stations
You can fill 20 presets with the FM radio stations
of your choice. If you assign the presets again,
the previously saved stations will be overwritten.
1
Switch on the device from stand-by mode
by pressing » 8 « on the remote control or
»
ON/OFF
« on the device.
2
Press »
M
« repeatedly until »FM« appears on
the display.
3­ To tune stations automatically:
Press and hold » « or » «.
When you release the button, the automatic
search stops at the next station.
– If RDS information is transmitted by the
broadcaster, then the device shows the sta-
tion name.
To tune stations manually
Move the frequency forward in brief steps by
repeatedly pressing » « or » «.
– The frequency goes up or down in 50 kHz
steps.
4 Press » PROG «.
– An available preset number flashes on the
display.
5 To select a preset number, press
»
– PRESET/ALBUM­+
« on the device or
» « or » « on the remote control within
5 seconds.
6
To store the selected channel press »
PROG
«
within 5 seconds.
– Display: The stored station with the preset
number is shown.
7 To search and store more stations, repeat steps
3 to 6 as many times as necessary.
SETTINGS
­---------------------------------------------------------------------------------------------------------------------------------------
Setting­the­time­and­date
1 Switch off the device by pressing » 8 « on the
remote control or »
ON/OFF
« on the device.
2
Press and hold down »
PROG
«.
– Display: »
12 H
« or »
24 H
« flashes.
3 Press » « or » « to chose 12 H or 24 H
mode and press »
PROG
« to confirm.
– Display: The hour flashes.
4 Press » « or » « briefly to set the hours
step by step or hold down to run through the
hours continuously and press »
PROG « to con-
firm.
– Display: The minutes flash.
5 Press » « or » « briefly to set the minutes
step by step or hold down to run through the
minutes continuously and press »
PROG
« to
confirm.
– Display: The year flashes.
Note:
7
When the minute displays changes from
»
59
« to »
00
«, this does not affect the hour
display.
6
Press » « or » « briefly to set the year
step by step or hold down to run through the
years continuously and press »
PROG
« to con-
firm.
– Display: The month flashes.
7
Press » « or » « briefly to set the month
step by step or hold down to run through the
months continuously and press »
PROG
« to
confirm.
– Display: The day flashes.
8
Press » « or » « briefly to set the day step
by step or hold down to run through the days
continuously and press »
PROG « to confirm.
– Display: The current time and date.