ENGLISH
20
GENERAL FUNCTIONS
---------------------------------------------------------------------------------------
Switching on and off
1
Switch on the device with the input source by
moving the »
CD TAPE/OFF RADIO
« switch
to the required position.
2
Move the »
CD TAPE/OFF RADIO
« switch
to the »
TAPE/OFF
« position to switch off the
device.
Selecting the input source
1
Select the input source (CD, TAPE or RADIO)
using »
CD TAPE/OFF RADIO
«.
Adjusting the volume
1
Adjust the volume with »
–
ß
+
«.
Switching the Ultra Bass System
on and off
This function boosts the bass frequencies.
1
Switch the Ultra Bass System on and off by
pressing »
UBS
«.
Listening with headphones or
earphones
1
Insert the headphone plug (ø 3.5 mm) into the
»
0
« socket on the left of the device.
– This switches off the loudspeakers.
Note:
7
Prolonged listening with the head phones
or ear phones at loud volumes can damage
your hearing.
RADIO MODE
------------------------------------------------------------------------------------------------------------------------
Antenna
1
For FM (VHF) reception, extend the telescopic
antenna.
Note:
7
If the FM signal is too strong, it is advisable
to push in the telescopic antenna.
Selecting the radio input source
1
Move the »
CD TAPE/OFF RADIO
« switch to
the »
RADIO
« position.
Selecting radio stations
1
Select the frequency band (FM or MW) with
»
FM MW
« on the right side of the device.
2
Select the radio station using »
TUNING
« on
the right side of the device.
Stereo/mono reception
If the device receives an FM stereo station, »
FM
ST ●
« lights up green. However, if the signal from
the FM stereo station is weak, you can improve
the sound quality by switching to mono reception.
1
Press »
MONO STEREO
« on the back of the
device to switch to mono reception.
2
Press »
MONO STEREO
« on the back of the
device to switch to stereo reception.
