25
ENGLISH
TAPE MODE
-----------------------------------------------------------------------------------------------------
Recording from a CD
1
Put in a cassette with the protection tabs in-
tact and press »
rr
« or »
ee
« to find the
position on the tape.
2
Move the »
CD TAPE/OFF RADIO
«
switch to the »
CD
« position.
3
Pause the CD during playback at the required
position by pressing »
PLAY/PAUSE
e
II
«.
4
Press »
« to start recording.
– The »
r
« button is automatically engaged.
CD playback starts automatically.
– The device automatically stops recording
at the end of the tape.
CD synchro recording
1
Put in a cassette with the protection tabs in-
tact and press »
rr
« or »
ee
« to find the
position on the tape.
2
Move the »
CD TAPE/OFF RADIO
«
switch to the »
CD
« position.
3
Press »
« to start recording.
– The »
r
« button is automatically engaged.
Playback starts automatically from the be-
ginning of the CD or the beginning of the
stored music program, if you first pressed
»
PROG.
«.
– The device automatically stops recording
at the end of the tape.
Cleaning the tape drive
To guarantee good recording and playback
quality, clean the parts shown (1, 2, 3) after
every 50 hours of use, or once a month.
Open the tape compartment, moisten a cotton
swab with alcohol or a special head-cleaning
fluid and clean the idler (3), the capstan (2) and
the magnetic heads (1). Close the cassette com-
partment. You can also play a cleaning cassette
to clean the magnetic heads (1).
Protect your cassettes from humidity, dust, heat
and cold.
Do not store your cassettes near devices with
strong magnetic fields such as television sets or
stereo speakers.
After using a cassette, put it back in its protective
case.
5
3
2
1
4
3
2
1
1
