16
General information
The PSW 5000 system works with a wireless audio receiver integrated in the outdoor loud-
speaker, which enables the reception of the wireless audio signals from the wireless module.
Loudspeaker connection cables are no longer necessary.
The wireless audio transmission range is limited by national and international regulations to
prevent radio interference from neighbouring devices. The wireless audio transmission power
is <10 mW. This guarantees an unhindered reception range of approximately 100 m. This
range is restricted inside buildings, depending on the construction materials used.
Avoid placing the system near metal objects or electrical devices such as cordless telephones
which use radio signals.
Since the audio signals are not transmitted on an exclusive range we cannot guarantee that
this will not cause interference. To avoid interference you can choose between 3 transmission
channels.
In some circumstances, people, walls and other surfaces can reflect radio signals. Reflected
signals can mix with non-reflected signals, thus causing a type of interference known as multi-
path reception. This can lead to noise or a temporary loss of sound. If such interference does
occur, simply position the transmitter or the loudspeaker differently.
Switching on the system
1
Switch on the hi-fi system.
Note:
If the audio outputs of your hi-fi system have an adjustable output level, you can adjust
the volume on the hi-fi system. If the audio output levels are fixed, you have to adjust the
volume on the loudspeaker.
2
Set the transmission channel (1, 2 or 3) with »
Channel 3 2 1 Off
« on the wireless
module.
– The operating display of the wireless module (front of the device) lights up.
3
Switch on the loudspeaker with »
ON/OFF
Ǽ
«.
– The operating display of the loudspeaker lights up.
4
On the loudspeaker, set the same transmission channel (1, 2 or 3) as set on the wireless
module using »
Channel 1 2 3
« (bottom of the device).
5
If necessary, set the required volume on the loudspeaker with »
–
z
+
«.
Note:
If signal interference occurs during operation, select another transmission channel which
corresponds on both the wireless module and the loudspeaker.
OPERATION
____________________________________________________
