16
ENGLISH
Power supply
The scale operates with four AAA batteries
(total of 6 V). The detachable control unit runs on
three AAA batteries (total of 4.5 V).
Scale
1
Open the battery compartment lid.
2
Insert the four AAA batteries. Observe the
polarity marked on the base of the battery
compartment.
Control unit (handheld)
1
Open the left battery compartment lid.
2
Insert two AAA batteries. Observe the polarity
marked on the base of the battery compartment.
3
Open the right battery compartment lid.
4
Insert one AAA battery. Observe the polarity
marked on the base of the battery compartment.
Initial setup
The scale must be initialised after inserting the bat-
teries for the first time or changing the batteries.
1
Switch on the control unit and scale by press-
ing the »
ON/OFF
« button.
2
Activate the scale by tapping lightly on the
glass surface
with your foot.
– A signal tone confirms the scale is active.
– Afterwards the appliance will switch off
automatically. It is now ready to use.
Notes
7
Do not expose the batteries to extreme heat,
caused for example by direct sunlight, heaters
or fire.
C
7
If the batteries are running down (approx.
2.3 V), a battery symbol appears in the dis-
play. Insert new batteries immediately.
7
Remove the batteries when they are flat or
when you know that the device will not be
used for a long period of time. The manufac-
turer accepts no liability for damage caused
by leaking batteries.
Environmental note
7
Batteries, including those which do not contain
heavy metal, should not be disposed of with
household waste. Please dispose of used bat-
teries in an environmentally sound manner.
Find out about the legal regulations which
apply in your area.
Operating the scale
Notes
7
You do not need to enter any data for measur-
ing your body weight.
7
The scale measures your weight in increments
of 100 grams.
7
It uses a very precise 4 point measurement.
1
A switch located in the right battery compart-
ment
of the control unit, switches between
the Anglo-Saxon (lb/in) and European (kg/cm)
measurements.
2
Place the scale on a smooth flat surface.
3
Hold the detached control unit
with both
hands.
4
Switch on the control unit and scale by pressing
the »
ON/OFF
« button.
A
P
BODY ANALYZER SCALE PS 8710
___________________
02PS8710_en 27.10.2009 14:04 Uhr Seite 16