ENGLISH
41
//
INFORMATION
__________________________________________________________________________
Rectifying malfunctions yourself
Not every interference to picture and sound is caused by a defect in your DVD player.
Accidentally pulled-out cables, damaged DVDs/CDs, and worn out batteries in the remote
control can also impair functioning.
If the following measures do not bring about satisfactory results, consult an authorised
dealer!
Malfunction
No return to start-up screen when
DVD/CD is removed
DVD player does not respond to remote
control
No picture
Distorted picture
DVD/CD cannot be played
No sound
Distorted sound from Hi-fi system
Security system is active, the four-digit
code number is not known.
Cause/Remedy
Switch the DVD player off and then on again.
Check if another DVD/CD must be inserted for the program.
Point the remote control directly at the TV.
Remove all obstacles which may impair the path of the re-
mote control signal.
Check or replace the remote control batteries.
Switch the remote control to »
DVD
«.
Check the video connection.
Ensure that there are no fingerprints on the DVD/CD, follow
the cleaning instructions on Page 38.
Check if the label on the DVD/CD is facing upwards.
Clean the DVD/CD.
Check if the DVD/CD is damaged by testing it with another
DVD/CD.
Check the audio connections.
Try another playback source.
Ensure that the audio connections have not been connected
at the phono input on the amplifier.
Cancel security system; instead of entering the code number,
press the »
■
« key four times.
