ENGLISH
7
Wall mounting
The plasma television should only be fixed to vertical walls.
The wall surface must be strong enough to bear the weight.
Use fastening equipment suitable for a weight of 50 kg.
For wooden or cavity walls, use suitable wall plugs and screws.
1
Carefully remove the front and rear glass plates from the feet.
2
Place the plasma screen on a level surface (such as a table), and protect the
screen from scratches.
3
Undo the screws of the device feet (
A
) using the Torx key supplied and take
off the feet (
B
).
4
Attach the supplied wall brackets (
C
) using screws (
D
).
5
Attach the spacers (
E
) supplied.
6
Mark the holes on the wall.
– The distance between the screws is 634 mm, and the openings for the
screws have a diameter of 10 mm.
7
Drill the holes in the wall, insert the wall plugs and screw in the screws.
8
Hang the plasma screen on the screws.
SET-UP AND SAFETY ____________________________________
634
R
L
LINE OUT
AUDIO LINE IN
YC (S-VIDEO)
PC
YUV/VIDEO
PC (RGB/DVI)
ANTENNA
RS 232
Y
(VIDEO)
U
V
YC
(S-VIDEO)
VIDEO LINE IN
AV 2/SCART 2
AV 1/SCART 1
R
L
LINE OUT
AUDIO LINE IN
YC (S-VIDEO)
PC
YUV/VIDEO
PC (RGB/DVI)
ANTENNA
RS 232
Y
(VIDEO)
U
V
YC
(S-VIDEO)
VIDEO LINE IN
AV 2/SCART 2
AV 1/SCART 1
A
A
A
A
B
B
C
C
D
D
E
E
