Grundig MT 8240 WET & DRY, Руководство пользователя

Страница: 26 / 96

26 ENGLISH
Thinning out hair
1
If necessary, remove the attachment
by pressing in both side catches
B
and lifting off.
2
Insert attachment
A
(width 38 mm) or
7 (width 30 mm), put comb attachment
4
(width 2 mm) carefully at the top
and press down until it clicks into place.
3 Press the
C
button to switch on the
appliance and start thinning out your
hair.
4 Press the
C
button to switch off the
appliance after use.
Skin close cut of body hair
Please use the body hair trimming
head
1
.
1 If necessary, remove the attachment
by pressing in both side catches
B
and lifting off.
2
Insert attachment
1
carefully at the
top and press down until it clicks into
place.
3
Press the
C
button to switch on the
appliance and start trimming your
body hair.
Notes
7
Do not apply strong pressure when
cutting, as this may cause skin injury.
OPERATION ______________________________
7
Clean the body hair trimming head
1
with the cleaning brush supplied.
4
Press the
C
button to switch off the
appliance after use.
Trimming body hair to a
certain length
Please use the body hair trimming head
1
and attachment comb
2
.
1
If necessary, remove the attachment
by pressing in both side catches
B
and lifting off.
2 Insert attachment
1
carefully at the
top and press down until it clicks into
place.
3
Push the attachment comb
2
careful-
ly and firmly onto the rounded rear
half of the cutting head from above
and let it click into place.
Note
7
To adjust the attachment comb
2
,
attach it in one of the three side rails
of the body hair trimming head
1
.
The nearest rail to the trimming
blades will adjust the attachment to
9 mm, the middle rail to 5 mm and
the outer rail to 2 mm.
4
Press the
C
button to switch on the
appliance and start trimming your
body hair.
5 Press the
C
button to switch off the
appliance after use.