Grundig MT 8240 WET & DRY, Руководство пользователя, Страница: 23 / 96

23 ENGLISH
POWER SUPPLY ___________________________
Notes
7
Charge up the batteries completely
before using them for the first time
or if you have not used them for a
long time (approx. 24 hours timer-
controlled charging).
– The charging display
D
lights up
red when charging and changes
to green when it is fully charged.
7
After initial charging, the time
required for the subsequent charg-
ing of batteries is 120 minutes only
with the appliance switched off. If
you switch on the appliance while it
is charging, charging will stop.
– The charging display
D
disap-
pears.
7
The ambient temperature should be
between 5 °C and 40 °C.
7
When fully charged, the appli-
ance works for about 120 minutes.
This depends on the attachment
being used. It is not advisable to
charge the batteries after every
use, especially if you do not use the
appliance for the full battery capac-
ity.
7
Charge the batteries at your con-
venience only when they are com-
pletely discharged. This increases
their service life. Avoid charging
every day.
Using the charging stand
1 Plug the socket
E
of the appliance
into the charging stand.
2
Plug the power cord into the socket
on the charging stand.
3 Plug the adapter into the wall socket.
Mains operation
(with the adapter)
Check that the voltage indicated on the
type plate of the adapter corresponds
to your local power supply.
The only way to disconnect the appli-
ance from the power supply is to unplug
the adapter.
1
Insert the power cord into the socket
E
on the appliance.
2 Plug the adapter into the wall socket.
Caution
7
When in the bathroom or next to a
water connection, you must only use
the appliance in battery mode; never
run it from the mains.