12
CONNECTION/PREPARATION
___________________
Power supply
The player operates with the integrated lithium-polymer battery 1 x 3.7 V,
500 mA.
Charging the battery
Charge the battery using the computer or with the charger supplied. You can
also charge the player by connecting it to a USB compatible hi-fi system using a
USB cable.
Note:
When charging the battery with the charger supplied, the player is still ready
for operation.
1
Connect the USB interface of the player via the USB cable with the appropri-
ate interface on the computer, the charger or hi-fi system.
2
Switch on the computer or hi-fi or connect the charger to the power supply.
– The display indicates the charging progress. The charging time is approxi-
mately four hours. You can see in the »
P
« display when the battery is
fully charged.
Notes:
The display of the player tells you about the state of the battery. If you see
»
Ä
« in the display, the battery is running low.
The playing time of the device with batteries is up to ten hours in audio mode
and up to six hours in video mode.
Note:
There is a risk of explosion if the battery is not replaced properly. Only use
the same type of battery or an equivalent.
Connecting to the computer
1
Switch on the computer.
2
Switch off the player.
3
Connect the USB interface of the player to the respective interface on the
computer via a USB cable.
– A display will appear as soon as the connection is made.
