20
ENGLISH
OPERATION _________________________________
4
Put the base unit
B
on the inner lid
C
on the
glass bowl
D
. Make sure the semicircular
notches on the base unit are lined up with the
ridges on the inner lid.
5
Insert the plug into the wall socket.
6
Press and hold the operation switch
A
.
– The appliance starts operating.
Note
■
You can press the operation switch
A
continu-
ously or intermittently. To press intermittently,
use the “PULSE” function of the appliance.
You can obtain a better quality of chopping
with the “PULSE” function.
7
Release the operation switch
A
to finish the
operation.
Notes
■
To prevent overheating do not operate the
appliance continuously for more than 10
seconds.
■
If the chopper does not work or if the chop-
ping blade insert only turns slowly first pull out
the power plug. Then take the base unit and
the inner lid off. Check the glass bowl to see
if there is something blocking the chopping
blade. You might have put too much hard
food in the glass bowl.
■
If the ingredients stick to the sides of the glass
bowl, you can use a spatula to remove the
food from the glass bowl. Make sure, the ap-
pliance is switched off before doing this.
8
Disconnect the power plug from the wall
socket. Remove the base unit
B
and the inner
lid
C
.
9
Take out the chopping blade
F
carefully and
remove the food from the glass bowl
D
.
Caution
■
Do not touch the chopping blade with your
bare hands. The chopping blade is very
sharp.
