Grundig M 2050 BT DAB+, Руководство по эксплуатации, Страница: 29 / 85

29­
ENGLISH
SETTINGS
­---------------------------------------------------------------------------------------------------------------------------------------
Tuning­and­storing­FM­radio­sta-
tions
After connecting the hi-fi system to the mains
power for the first time, you can start the auto-
matic station search.
1 Switch on the hi-fi system by pressing » 8 « or »
«
­
on the device or » 8 « or »
FM/DAB
« on
the remote control.
Note:
7
If you switch on the hi-fi system with » 8 « or
» « on the device, select with » « the
FM input source.
2
Activate the automatic station search by press-
ing » «.
– Display: »
AUTO SYNC
« for a short time.
– The device searches for up to 40 stations
with strong reception and stores them auto-
matically. After the search has finished, you
will hear the station stored at preset 01.
Notes:
7
You can cancel the automatic station search
by pressing »
7
«.
7
You can restart the automatic station search
by pressing »
PROG
« until the frequency
display changes to rapid run-through.
Setting­and­storing­radio­stations­
manually
1 Set the radio station by briefly pressing »
3
«
or »
4
« repeatedly.
– Display: the frequency changes in steps of
50 kHz;
or
press and hold down »
3
« or »
4
« until the
frequency changes to rapid run-through.
2 Save a radio station as a preset by pressing
»
PROG
«, selecting the preset with » « or
» « and then press » PROG « to save.
3 To search and save more radio stations, repeat
steps 1 to 2.
Setting­the­time
The time is updated automatically if a DAB or
RDS radio station transmits a time signal.
Note:­
7
The time must be reset after a power failure
or after disconnecting from the mains.
1­ Select the DAB input source by pressing
»
SOURCE « on the device or » FM/DAB « on
the remote control.
2
Select a DAB radio station by pressing » «
or » « on the device » « or » « on the
remote control.
3
Press »
INFO
« on the remote control to switch
to the time display for the DAB radio station
and confirm the time with »
e II «.
– Display: » CT SYNC «, the time is adopted.
Notes:
7
Some RDS stations transmit an RDS time
signal. If the selected RDS station transmits
time information, the time can be updated
automatically.
Press »
INFO
« repeatedly until the time is
displayed. If »
RDS CLK
« displayed, the time
signal has not yet been received. Please
wait until the time is displayed.
If the correct time is displayed, press and
hold » « to confirm it.
7
The time must be reset after a power failure
or after disconnecting from the mains.